XD9000i - Warn Winch - 9000 lb - w/Roller Fairlead, Wire Rope

PART NUMBER 27550

$ 1,607.55

No-load retrieval line speed of 38' per minute. Integrated solenoid. Runs cool with low amp draw for long winching duty cycles. Comes with 125' of 5/16" wire rope.

Integrated control box provides excellent protection to electronics
Exclusive brake design provides superior control while winching
Durable 3-stage planetary geartrain for smooth, reliable, operation
Series-wound, high-speed motor provides fast line speed and strong pulls
Chip-resistant, powder-coated finish
Remote control with 12' (3.7m) lead
Durable 5/16" (8mm) diameter galvanized steel wire rope.

XD9000i SPECS/PART NUMBERS

Part Numbers: 27550

Winch Model: XD9000i

Rated Line Pull: 9,000 lbs. (4080 kgs) single-line

Motor: Series Wound 12V 4.6 hp

Electrical controls: Solenoid

Remote Control: Remote switch, 12' (3.7m) lead

Geartrain: 3-Stage Planetary

Gear ratio: 156:1

Clutch (freespooling): Sliding Ring Gear

Brake: Automatic Direct Drive Cone

Drum diameter/Length: 2.5" /9.0" (6.4cm/23cm)

Weight: 85 lbs. (38.5kgs.)

Wire rope: 125', 5/16" dia. (38m, 8mm)

Fairlead: Roller

Recommended Battery: 650 CCA minimum for winching

Battery leads: 2 gauge, 72" (1.83m)

Finish: Argent Gray Powder Coat

12V DC PERFORMANCE SPECS
Line Pull Lbs.(Kgs.)	Line Speed FT./min(M/min.)	Motor Current	Pull by layer layer/Lbs(Kgs.)
0	38 (11.58)	56 amps	1/9000 (4082)
2000 (910)	15 (6.8)	161 amps	2/8190 (3715)
4000 (1810)	10.3 (3.14)	252 amps	3/7500 (3402)
6000 (2720)	7.5 (2.29)	332 amps	4/7010 (3180)
8000 (3630)	5.1 (1.55)	423 amps
9000 (4080)	3.9 (1.19)	478 amps

Above performance specs are based on first layer of drum

Winch Dimensions: 21.8" L. x 6.3" D. x 9.9" H. (553mm L. x 160mm D. x 254mm H.)

Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)

XD9000i Operator's Manual

XD9000i Parts List
(SN 1247800 & Up)

We Also Recommend